Shower Niches and Recessed Storage: Getting the Detail Right

A niche looks like a simple hole in the wall. It is actually a small waterproofing problem with five faces, three of which slope the wrong way if nobody thinks about it.

By VN Bathrooms QBCC #15521533 Bathroom Renovation Guide Published 5 August 2026

Start here

Key takeaways

Recessed storage has quietly become the default expectation in a renovated bathroom. It removes the wire caddy, keeps bottles off the floor and reads as considered rather than added on.

It is also one of the details most often executed poorly, because it introduces a five-sided cavity into the middle of a waterproofed wall. Done well it is invisible and lasts as long as the room. Done badly it collects water, stains the grout and eventually leaks into the wall behind it.

This guide covers where a niche can go, how it should be built, how it is sized, and what to do when the wall cannot take one. For related detail see why bathroom waterproofing matters and the free renovation advice hub.

How big should a shower niche be?

Size it to the tile so the niche opening lands on grout lines rather than cutting tiles awkwardly, and deep enough to hold a tall shampoo bottle upright — a shallow niche looks neat and holds nothing. Position it on a non-load-bearing internal wall, out of the direct spray line, at a comfortable reaching height. The base must be tiled with a slight fall out toward the shower so water drains rather than sitting in the corners.

Where a Niche Can Go

The wall decides the possibility before the design does. A niche removes part of the wall cavity, so it can only sit where nothing structural or in the way is present.

  • an internal, non-load-bearing wall is the straightforward case
  • the cavity must be free of pipes, wiring, bracing and ducting
  • external walls are often problematic due to structure, insulation and depth
  • avoid placing it directly opposite the shower rose where it takes constant spray
  • the side wall of the shower, out of the direct stream, is generally ideal
  • a niche above a bath must clear the tile set-out and the bath edge cleanly
  • in an apartment, the wall may be common property — check before planning

Height matters more than most people expect. A niche placed for visual balance rather than reach is a permanent minor irritation. Set it where a standing adult reaches comfortably without stretching or crouching.

Sizing It to the Tile

The single biggest visual difference between a good niche and an average one is whether its dimensions were derived from the tile layout or chosen arbitrarily.

  • set the opening so its edges align with grout lines in the surrounding tile
  • a niche the exact width of one or two tiles reads as deliberate
  • internal depth should clear a tall bottle — shallow niches are decorative only
  • a single wide niche is usually more useful than two small ones
  • consider a horizontal shelf niche running the width of the shower wall
  • a separate lower niche for a foot rest is worth considering in a large shower

This is why the niche has to be discussed during selections, not during tiling. Its dimensions depend on the tile you chose, and the framing is built before the tile arrives on site.

Free planning tool

Planning your bathroom renovation?

Try our free Gold Coast bathroom estimator — a ballpark price in under two minutes, no email required to see the range.

How It Should Be Built

The sequence matters. A niche is framed, sheeted, waterproofed and then tiled — and the waterproofing stage is where the failures originate.

  • framing is built to the finished opening size, allowing for tile thickness
  • wet-area rated sheeting lines every face of the recess
  • the membrane is continuous through the niche, with bond breakers at internal corners
  • the base is formed with a slight fall out toward the shower floor
  • prefabricated niche formers are common and can be excellent when installed correctly
  • tiling runs across the base and up the sides so water sheds outward
  • the outer edge is finished with a mitred tile edge or a quality trim

A flat niche base is the most common defect. Water sits in the corners, grout discolours within months, and the silicone joint fails not long after.

Finishing Choices

Once the construction is sound, the niche becomes a design opportunity — a small framed panel in the middle of a large tiled surface.

Continuing the wall tile

The quietest option. The niche reads as a recess in the wall rather than an object. It relies entirely on the crispness of the edges, so mitred tile corners look substantially better than a metal trim in this approach.

A contrasting back

A mosaic, a stone slab or a feature tile inside the niche makes it a deliberate accent. It works well when the surrounding wall is plain, and it becomes visually busy when the wall already has pattern.

Lighting

A low-voltage LED strip in the top of the niche is a genuinely effective touch, but it is a wet-area electrical item that must be specified at rough-in and comply with zoning requirements — see bathroom lighting and electrical planning.

When a Niche Is Not Possible

Solid masonry walls, structural walls, apartments with restricted walls and shallow cavities all rule a recess out. The alternatives are better than they used to be.

  • a full-width tiled ledge formed at the top of a half-height wall
  • a stone or tiled corner shelf built into the tiling rather than fixed on top
  • a surface-mounted stainless shelf, fixed into the wall before waterproofing
  • a bench seat in a larger shower, which doubles as storage
  • a recessed niche in the adjoining non-wet wall, outside the shower
  • a well-planned vanity with drawers, reducing what needs to live in the shower

Anything fixed to a tiled wet-area wall after the fact requires penetrating the waterproofing, which should be avoided. Decide on shelving before the membrane goes on. Broader storage planning is covered in bathroom storage and vanity planning.

Keeping It Looking New

A niche concentrates the two things that age a shower fastest: standing water and soap residue.

  • squeegee or wipe the niche base along with the shower glass
  • lift bottles occasionally rather than letting residue set beneath them
  • check the silicone joint at the base annually and replace it when it discolours
  • avoid harsh acidic cleaners on stone or unsealed grout inside the niche
  • if water consistently sits in the base, raise it with your builder while under warranty

A full maintenance routine is set out in bathroom maintenance: grout, silicone and glass care.

Frequently asked questions

Not without opening the wall, which means removing tiles and breaching the waterproofing membrane. In practice it is a renovation-stage decision, and retrofitting one is close to rebuilding the wall.

A correctly waterproofed niche does not. Leaks come from a membrane that is not continuous through the recess, missing bond breakers at internal corners, or a base with no fall that holds water permanently.

Yes — a slight fall out toward the shower so water drains rather than pooling in the corners. It is a small detail that determines whether the grout in the niche still looks clean in five years.

Yes, when properly installed and integrated into the waterproofing system. They give consistent dimensions and square corners, which makes tiling neater. The membrane detailing around them still has to be done correctly.

One well-sized niche usually beats two small ones. In a shared shower, a single wide horizontal niche or one niche per user at appropriate heights both work, provided the wall can accommodate them.

Sometimes, but it is more complicated. External walls may contain structure, bracing and insulation, and reducing the wall depth affects thermal performance and weathertightness. Your builder should assess the specific wall.

Keep reading

How to Plan a Bathroom Renovation on the Gold Coast

A practical Gold Coast guide to planning layout, drainage, ventilation, storage, tiles and inspection preparation before renovating a bathroom.

Bathroom Waterproofing Standards Australia: A Practical Homeowner Guide

A plain-English guide to Australian bathroom waterproofing standards, common wet-area risks, Gold Coast humidity, drainage, tiles, strata issues and inspection checks.

Narrow Bathroom Layout Ideas: A Gold Coast Homeowner Checklist

A practical checklist for planning a narrow bathroom layout on the Gold Coast, including fixture placement, drainage, ventilation, tiles and storage.

Ready to plan your bathroom renovation?

Use our free estimator to get a practical starting range, then request a fixed-price quote after inspection.