A beautifully finished bathroom with nowhere to put anything is a common and completely avoidable outcome. It happens because storage is treated as a product choice — pick a vanity — rather than as a planning exercise.
The households that end up happiest with their bathrooms are the ones who worked out what they actually keep in the room, and where each of those things would live, before the cabinetry was ordered.
For the full renovation sequence, see the free renovation advice hub.
How do you plan bathroom storage?
List everything that currently lives in the bathroom, split it into daily, weekly and occasional use, then assign each group a home: daily items in a top drawer or shaving cabinet, weekly items in a lower drawer, and occasional items in tall storage or a linen cupboard. Choose the vanity size and configuration to suit that list, and confirm the plumbing rough-in position before ordering so drawers can be notched around the waste.
Start With What Actually Has to Be Stored
This takes fifteen minutes and prevents the two most common outcomes: a vanity that is too small for a family, and an oversized one that eats circulation space for storage nobody needs.
- empty the existing bathroom cabinet onto a bench and sort it honestly
- separate daily items from weekly and occasional ones
- decide what belongs in the bathroom and what belongs in a linen cupboard
- count the users — a shared family bathroom needs roughly double a single ensuite
- note the tall items, because bottle height dictates drawer depth
- identify anything that must be locked away or kept out of children's reach
Choosing the Right Vanity for the Room
The vanity is the largest single piece of joinery in the room, and its dimensions have consequences well beyond storage.
Width, depth and clearance
Standard vanity depths sit around 460–500mm. In a tight bathroom, a 400mm slimline unit can be the difference between a comfortable walkway and constantly squeezing past. Check the door swing against the vanity before committing to a size.
Single versus double basin
Double basins need roughly 1500mm of width to work properly, and they cost storage: two sets of plumbing under one bench remove most of the usable drawer volume. In many households a single basin with a longer benchtop is the more practical result.
A drawer brings its contents to you; a cupboard makes you reach into the dark.Drawers, Doors and the Plumbing Behind Them
Internal configuration is where a vanity is either genuinely useful or merely a box under a basin.
- soft-close runners rated for the drawer weight are worth the small premium
- a shallow top drawer suits daily items; a deeper lower drawer suits bottles and towels
- drawers can be notched or U-shaped around the basin waste when planned in advance
- internal dividers stop a large drawer becoming a single unsorted tray
- doors still make sense for bulky, infrequently accessed items
- confirm the waste position with the plumber before the cabinetry is manufactured
Rough-in positions are locked in early — see bathroom plumbing and drainage explained.
Tall Storage, Niches and Borrowed Space
Bathrooms are usually short on floor area and long on unused wall. Vertical storage is almost always the cheapest capacity available.
- a full-height tall cabinet in a 300–400mm gap holds more than most vanities
- a mirrored shaving cabinet doubles as the mirror and keeps benchtops clear
- recessed shower niches remove caddies and keep the glass line clean
- a niche beside the toilet handles the items nobody wants on display
- open shelving suits towels but collects dust and humidity, so use it sparingly
- recessed cabinetry needs the framing prepared before wall linings go on
Materials That Survive a Queensland Bathroom
South East Queensland humidity is hard on cabinetry. The difference between a vanity that looks new in ten years and one that swells at the base is usually specification, not price.
- moisture-resistant substrates are the baseline for any bathroom joinery
- fully sealed and edged panels matter more than the visible finish
- engineered stone and porcelain benchtops handle water and cleaning products well
- quality hardware resists corrosion in coastal air far better than budget runners
- a wall-hung unit keeps the base of the cabinet out of standing water
- ventilation protects joinery as much as it protects paint and grout
Humidity control is covered in bathroom ventilation and mould prevention.
When Storage Decisions Have to Be Made
Storage feels like a late decision and behaves like an early one. Several elements are fixed long before the vanity arrives on site.
- recessed cabinets and niches are set during framing, before wall sheeting
- power inside a shaving cabinet must be planned at electrical rough-in
- wall reinforcement for a wall-hung vanity happens before lining and waterproofing
- custom joinery typically needs several weeks of lead time
- the basin and tapware choice determines the benchtop cut-outs
- changing the vanity after tiling usually means re-tiling or visible patching
The full build sequence is set out in what to expect during a bathroom renovation.
Frequently Asked Questions About Bathroom Storage
For everyday items, yes. A drawer brings its contents to you, while a cupboard requires reaching past the front row into a dark space around the plumbing. Cupboards still make sense for bulky, infrequently used items such as spare toilet rolls and cleaning products.
It depends entirely on whether the bathroom serves one person or a family, and whether there is a separate linen cupboard nearby. A useful rule is to plan for everything currently stored in the room plus about twenty percent, then check that daily items can be reached without moving anything else.
Yes. Cabinetmakers routinely notch drawer boxes around the trap and waste, or use a U-shaped drawer. It needs to be planned before the vanity is ordered, because the notch position depends on where the plumbing rough-in lands.
In most bathrooms it is the highest-value storage in the room, because it uses wall space that has no other purpose and keeps small items off the benchtop. Recessed versions look neater but need the wall framing prepared during construction.
Engineered stone and porcelain are the most durable and forgiving choices, and both handle water and cleaning products well. Timber and laminate can work, but they are less tolerant of standing water around the basin and tapware over the long term.
Wall-hung looks lighter, makes floor cleaning easier and lets you set the height to suit the household, but it needs wall reinforcement and reduces the usable internal volume slightly. Floor-standing gives more storage per dollar and suits family bathrooms where capacity matters most.
Related advice
More free guidance for Gold Coast and Brisbane homeowners.
Small Bathroom Design IdeasMaking a compact room feel and work larger.
Choosing Bathroom Tapware and FixturesBasins, mixers, finishes and PC item allowances.
Bathroom Layout and Space PlanningWhere the vanity should sit before anything is ordered.
Joinery Planned Around How You Live
VN Bathrooms plans vanities, niches and cabinetry as part of the build — measured on site, coordinated with the plumbing, and included in your fixed-price quote.
- QBCC Licensed #15521533
- Fixed-Price Written Quotes
- 7-Year Workmanship Warranty
Prefer to talk it through? Call or send a text message to 0434 242 045.