Bathroom Mirrors and Shaving Cabinets: Sizing, Lighting and Storage
The mirror is the one element in the room every person uses at close range, every day, in the least flattering light of their morning.
By VN Bathrooms QBCC #15521533 Bathroom Renovation Guide Published 5 August 2026Start here
Key takeaways
- **How big should a bathroom mirror be?** As a starting point, make the mirror the full width of the vanity or slightly narrower, and as tall as the wall sensibly allows above the splashback.
- **Sizing and Proportion:** Mirror size is one of the cheapest ways to change how large a bathroom feels, and one of the most commonly under-used.
- **Shaving Cabinets: Recessed vs Surface-Mounted:** A mirrored cabinet converts otherwise dead wall into the most convenient storage in the room.
- **Mirror Lighting That Actually Works:** The most common lighting mistake in a bathroom is a single downlight in the ceiling behind where you stand, casting your own shadow onto your face.
- **Demisters, LEDs and Other Features:** Mirror features range from genuinely useful to novelty. In a humid climate one of them stands out.
- **Installation Details Worth Getting Right:** A well-chosen mirror installed carelessly still looks wrong.
Mirrors get treated as a finishing purchase — something chosen near the end, sized to the vanity, and hung once the tiling is done. In a well-planned bathroom they are none of those things.
Mirror choice interacts with lighting, storage, electrical rough-in and the tile set-out. A recessed shaving cabinet in particular has to be planned before the wall is closed, and a demister or LED mirror needs a power supply positioned during rough-in.
This guide covers sizing, height, cabinet options and the decisions with hard deadlines. It pairs with bathroom lighting and electrical planning — see the free renovation advice hub for the full library.
How big should a bathroom mirror be?
As a starting point, make the mirror the full width of the vanity or slightly narrower, and as tall as the wall sensibly allows above the splashback. A wider mirror makes a small bathroom feel considerably larger and gives two people room to use it at once. Mount it so an average adult's eye line sits comfortably within the upper half, and confirm the height against the lighting position — a mirror hung without reference to the light above it will always underperform.
Sizing and Proportion
Mirror size is one of the cheapest ways to change how large a bathroom feels, and one of the most commonly under-used.
- matching the vanity width, or running wall-to-wall, reads as intentional
- a mirror substantially narrower than the vanity looks undersized and mean
- height is usually more constrained by the light fitting than by the wall
- in a shared ensuite, one wide mirror generally beats two separate ones
- round or arched mirrors soften a hard-edged tiled room, at some cost in usable area
- a mirror on the wall opposite a window multiplies natural light noticeably
In a compact bathroom, the single most effective visual move available is a full-width mirror. It is covered further in small bathroom design ideas.
Shaving Cabinets: Recessed vs Surface-Mounted
A mirrored cabinet converts otherwise dead wall into the most convenient storage in the room. The choice between recessed and surface-mounted has consequences well beyond looks.
Recessed
- sits flush with the wall, so it reads as a mirror rather than a box
- requires a non-load-bearing wall with a clear cavity
- must be framed before wall sheeting — it is not a later decision
- storage depth is limited by the wall thickness
- not usually possible on an external or structural wall
Surface-mounted
- can go on almost any wall, including masonry and apartments
- deeper internal storage than a recessed unit
- projects from the wall, which can crowd a narrow room
- fixings penetrate the wall, so blocking should be installed at framing stage
- easier to replace or change later
Either way, noggings or blocking behind the sheeting should be installed during framing. Fixing a heavy cabinet into a tiled wall without backing is a poor outcome that cannot be corrected easily.
Free planning tool
Planning your bathroom renovation?
Try our free Gold Coast bathroom estimator — a ballpark price in under two minutes, no email required to see the range.
Mirror Lighting That Actually Works
The most common lighting mistake in a bathroom is a single downlight in the ceiling behind where you stand, casting your own shadow onto your face.
- light should come from in front and to the sides of the face, not from directly overhead behind
- wall lights either side of the mirror give the most flattering, even result
- a backlit or edge-lit LED mirror provides soft ambient light but is not a task light on its own
- an integrated front-lit LED mirror can serve as the task light where wall space is tight
- colour temperature around neutral white suits grooming; very warm light distorts skin tone
- dimmable lighting is worth the small extra cost for night use
Every one of these needs a cable in the right place at rough-in. Full detail is in bathroom lighting and electrical planning.
Demisters, LEDs and Other Features
Mirror features range from genuinely useful to novelty. In a humid climate one of them stands out.
- demister pads — a heated element behind the glass that keeps a clear zone after showers; the most useful feature in a subtropical climate
- integrated LED lighting — useful when wall space for separate lights is unavailable
- motion or touch sensors — convenient, and one more component that can fail
- shaver outlets inside a cabinet — handy where the electrical layout permits
- internal cabinet lighting — pleasant, rarely necessary
- bluetooth or display features — generally not worth the complexity in a wet area
A demister does not replace ventilation. If the mirror fogs heavily every shower, the underlying issue is air change — see bathroom ventilation and mould prevention.
Installation Details Worth Getting Right
A well-chosen mirror installed carelessly still looks wrong. These are the details that separate the two outcomes.
- blocking or noggings installed behind the sheeting at framing stage
- power supply positioned precisely for a demister or LED unit, outside wet-area zones
- mirror height set against the actual eye line of the household, not a generic figure
- clearance checked against tapware, the splashback and any wall lights
- a small gap and a silicone seal at the tile face rather than hard contact
- confirm the door swing on a cabinet does not collide with a wall light or a corner
- for a recessed unit, confirm the wall cavity is clear of services before framing
The recurring theme is that almost every mirror decision has a deadline earlier in the program than people expect. Deciding at selections rather than at fit-off avoids compromise.
Choosing for Your Bathroom
A short decision path for the most common situations.
- small bathroom, limited storage — recessed shaving cabinet, full vanity width
- generous bathroom with good joinery — plain frameless mirror with wall lights either side
- shared ensuite — one wide mirror, two lights, demister pad
- apartment or masonry wall — surface-mounted cabinet or a plain mirror
- no wall space for lights — front-lit integrated LED mirror
- humid room, heavy shower use — demister pad and a properly sized exhaust fan
Storage planning across the whole room, including what the cabinet actually needs to hold, is covered in bathroom storage and vanity planning.
Frequently asked questions
Set it so the eye line of the people using it falls comfortably within the upper portion of the glass, with the bottom edge clearing the splashback and tapware. A generic measurement is less useful than checking it against the actual household.
In a humid climate with a well-used shower, they are one of the more genuinely useful mirror features. They keep a clear zone immediately after a shower. They complement good ventilation rather than substituting for it.
No. It needs a non-load-bearing wall with a clear cavity free of pipes, wiring and bracing, and it must be framed before the wall is sheeted. External and structural walls generally rule it out.
A front-lit LED mirror can serve as adequate task lighting. A backlit or edge-lit mirror provides ambient glow rather than face lighting, so it needs a separate task light to be practical for grooming.
Matching the vanity width is a reliable default, and running wider or wall-to-wall often looks better still in a compact room. A mirror noticeably narrower than the vanity almost always reads as undersized.
A plain mirror, yes — though fixing into tile without backing behind it is not ideal. A powered mirror or a recessed cabinet cannot practically be added later, because both require decisions made before the wall was closed.
Keep reading
How to Plan a Bathroom Renovation on the Gold Coast
A practical Gold Coast guide to planning layout, drainage, ventilation, storage, tiles and inspection preparation before renovating a bathroom.
Bathroom Waterproofing Standards Australia: A Practical Homeowner Guide
A plain-English guide to Australian bathroom waterproofing standards, common wet-area risks, Gold Coast humidity, drainage, tiles, strata issues and inspection checks.
Narrow Bathroom Layout Ideas: A Gold Coast Homeowner Checklist
A practical checklist for planning a narrow bathroom layout on the Gold Coast, including fixture placement, drainage, ventilation, tiles and storage.
Ready to plan your bathroom renovation?
Use our free estimator to get a practical starting range, then request a fixed-price quote after inspection.