A large share of Gold Coast housing sits in strata schemes, from beachfront towers to low-rise complexes in Southport, Broadbeach and Labrador. Renovating a bathroom in one of those buildings is technically similar to renovating in a house — and administratively very different.
The reason is simple: a bathroom sits directly above someone else's ceiling. Waterproofing, drainage and structure are shared concerns, so the body corporate has a legitimate interest in how the work is done and by whom.
This guide explains the process in plain terms. It is general information, not legal advice — your scheme's by-laws always take precedence. More planning guides are in the free renovation advice hub.
What does apartment bathroom approval involve?
Request your scheme's by-laws and renovation policy in writing, establish which elements are lot property and which are common property, then submit a complete package: scope of works, contractor licence and insurance details, waterproofing and plumbing approach, program with working hours, and access and waste arrangements. Approval usually comes from the committee, sometimes with conditions.
Requirements vary between schemes and plan types. Always confirm your obligations with your body corporate manager or committee before committing to a scope of works.
Lot Property Versus Common Property
Almost every question about apartment renovations comes back to this boundary. It decides what you control, what the body corporate controls, and who is responsible if something fails later.
- finishes, fittings and fixtures inside the apartment are generally lot property
- the slab, structural walls and shared service risers are generally common property
- waterproofing membranes often sit at or near the boundary and attract close scrutiny
- pipework serving only your apartment may be treated differently to a shared stack
- the precise boundary depends on your plan format and by-laws, so confirm it in writing
- work affecting common property needs explicit authorisation, not just a courtesy notice
Establishing this at the start prevents the most expensive outcome in strata work: a scope priced and started, then halted because it touches something it should not have.
What a Body Corporate Usually Asks For
Committees are not trying to obstruct owners. They are trying to protect the building. A complete, professional submission is usually approved far faster than a brief one.
A written scope of works
Specific about what is being removed, what is being installed and whether any plumbing, electrical or structural element changes position. Vague scopes invite questions and delay.
Contractor credentials
QBCC licence details, public liability insurance and the relevant trade licences for plumbing, electrical and waterproofing work. Many schemes will not consider an application without these attached.
Waterproofing details
How the wet areas will be waterproofed, by whom, and what certification will be provided on completion. This is the item committees care about most, for obvious reasons.
Program and conditions
Expected start and finish dates, working hours, how access will be managed and how waste will leave the building.
A complete submission — scope, drawings, licences and program — is the fastest route through a committee.Building Manager Rules That Shape the Program
Even after approval, the building manager sets the day-to-day conditions. These are not minor administrative details — they directly determine how many productive hours exist in a working day.
- permitted working hours, often shorter than standard site hours, with no weekend work
- lift bookings and protective blanketing for materials and waste
- designated loading zones and limited parking for trade vehicles
- restrictions on where waste bins can be placed and when they can be moved
- requirements to protect lobbies, corridors and lift interiors
- advance notice to neighbours before noisy stages such as demolition
These conditions are a real cost input, and they are one of the main reasons apartment renovations differ in price from otherwise identical houses.
Physical Constraints in Apartment Bathrooms
Beyond paperwork, apartments impose genuine building constraints that shape what is achievable.
- concrete slabs limit how far waste pipes can be relocated, or rule it out entirely
- existing floor levels may not allow a set-down for a fully level-entry shower
- internal bathrooms rely on ducted exhaust systems that may be shared with other units
- core-drilling or penetrating a slab typically needs engineering advice and specific consent
- ceiling voids may be shallow, restricting lighting and ducting options
- window and facade changes are almost always common property and rarely permitted
The drainage constraints in particular are worth understanding before you fall in love with a new layout — see bathroom plumbing and drainage explained.
Noise, Access and Neighbour Management
Your neighbours share walls, floors and lifts with the work. Managing that relationship well makes the whole project easier, particularly if a variation or extension is needed later.
- front-load the loudest work — demolition and any coring — into the earliest permitted days
- notify adjoining and below apartments in advance, in writing where the scheme requires it
- keep corridors clear and clean at the end of every working day
- use dust containment at the apartment entry, not just at the bathroom door
- confirm water shutdown timing with the building manager and notify affected units
- keep a single point of contact so complaints reach the builder rather than the committee
Insurance, Licensing and Documentation
Documentation is what protects you if a defect ever emerges — and in strata, defects can affect more than your own apartment.
- confirm the builder holds a current QBCC licence appropriate to the value of the work
- check public liability insurance and, where required, statutory home warranty cover
- keep the waterproofing certificate and the applicator's details permanently
- retain plumbing and electrical compliance documentation issued by the licensed trades
- photograph the wall and floor build-up before lining, including pipe and reinforcement positions
- provide the body corporate with completion documentation if the approval conditions require it
For what waterproofing certification actually covers, see why bathroom waterproofing matters.
How Approvals Affect the Timeline
The construction time for an apartment bathroom is broadly similar to a house. The overall project time is usually longer, because approval sits in front of it.
- allow time to obtain and read the by-laws and renovation policy before quoting
- allow committee turnaround, which may depend on their meeting schedule
- allow for conditions or requests for further information on the first submission
- book lifts, loading zones and water shutdowns well before the start date
- expect shorter permitted working hours to stretch the on-site program
- order long-lead items during the approval period rather than after it
Using the approval window to finalise selections is the single best way to recover that time. Our preparation guide covers what to lock in.
Frequently Asked Questions About Apartment Renovations
In most Queensland schemes, yes — because bathroom work almost always touches waterproofing, plumbing or the slab, which affect the building rather than only your lot. Approval requirements are set by your scheme's by-laws and the committee, so the first step is always to request them in writing.
Broadly, finishes and fixtures inside your apartment are lot property, while the structure, the slab, and shared services are common property. The exact boundary depends on your plan type and by-laws, so it should be confirmed with the body corporate rather than assumed from the floor plan.
Sometimes, but far less freely than in a house. Waste pipes usually run within the slab or a shared riser, and falls cannot be created where there is no depth to work with. Relocating a toilet or shower waste is the change most often ruled out on inspection.
It depends on whether the committee can approve it or whether it must go to a general meeting, and on how complete your submission is. Submitting a full package — scope, drawings, licences, insurances and waterproofing details — up front is the most effective way to avoid a second round of questions.
Typically a written scope of works, the contractor's licence details and insurances, the proposed program with working hours, waterproofing and plumbing details, and confirmation of how access, waste removal and protection of common areas will be handled.
Access, protection of common areas, restricted working hours, lift bookings and waste handling all add labour that a ground-level house does not require. The finishes may be identical; the logistics are not. We reflect those conditions in a fixed-price written quote after inspecting the building.
Often yes, particularly where a second bathroom exists. Dust control, protection of hallways and a clear daily pack-down matter more in an apartment than anywhere else, and should be agreed before work starts.
Related advice
More free guidance for Gold Coast and Brisbane homeowners.
How to Prepare for a Bathroom RenovationGetting your home, budget and expectations ready before trades arrive.
Bathroom Plumbing and Drainage ExplainedFalls, wastes and why moving fixtures is not a small change.
Why Bathroom Waterproofing MattersThe compliance step that protects the units below yours.
Renovating in a Strata Building?
VN Bathrooms works regularly in Gold Coast apartment buildings — licence and insurance documentation, waterproofing certification and building-manager coordination handled as part of the job. See our Gold Coast apartment bathroom renovation service for construction scope and access planning.
- QBCC Licensed #15521533
- Fixed-Price Written Quotes
- 7-Year Workmanship Warranty
Prefer to talk it through? Call or send a text message to 0434 242 045.