Bathroom Grout Selection: Cement, Epoxy and Why Colour Matters

Grout is about two per cent of the surface area and roughly half of what people notice when a bathroom starts to look tired.

By VN Bathrooms QBCC #15521533 Bathroom Renovation Guide Published 5 August 2026

Start here

Key takeaways

Homeowners spend weeks choosing tiles and about ninety seconds choosing grout. Then, five years later, the tiles look exactly as they did on handover and the grout is what makes the room look dated.

Grout choice affects appearance, cleanability, longevity and how forgiving the tiling looks. In a humid subtropical climate with hard-working showers, it also affects how much maintenance the room demands.

This guide covers the product types, colour strategy, joint width and sealing. For the tile decision itself, see how to choose bathroom tiles, or browse the free renovation advice hub.

Is epoxy grout worth the extra cost?

In a shower, usually yes. Epoxy grout is non-porous, does not need sealing, resists staining and holds its colour far longer than cement-based grout — which matters most in the wettest areas of a humid-climate bathroom. It costs more in both product and labour because it is harder to work with and must be cleaned off precisely as it cures. A common, sensible compromise is epoxy in the shower and wet zones with a quality cement-based grout elsewhere.

The Two Products You Are Choosing Between

Cement-based grout

The traditional option, available in a wide colour range and easy to work with. Modern polymer-modified cement grouts are far better than older products, with improved water resistance and stain performance.

  • lower material cost and lower labour cost
  • widest colour selection
  • porous, so it absorbs water and staining over time
  • benefits from sealing, and the seal needs periodic renewal
  • easier to patch and repair in future
  • can lighten or become patchy if washed off unevenly during installation

Epoxy grout

A two-part resin product that cures to a hard, non-porous joint. It behaves less like mortar and more like a plastic, which is both its strength and the reason it demands a skilled installer.

  • non-porous, so it does not absorb water or staining
  • no sealing required, ever
  • holds colour consistently over the life of the room
  • strong chemical and abrasion resistance
  • higher material cost and noticeably higher labour cost
  • unforgiving during installation — residue left on the tile face is difficult to remove
  • harder to repair or colour-match years later

Grout Colour Strategy

Grout colour changes how the tiled surface reads more than almost any other small decision. It is worth deciding deliberately rather than defaulting to white.

  • matching grout to the tile makes the surface read as one continuous plane
  • contrasting grout emphasises the pattern and the geometry — deliberate, and busier
  • brilliant white grout looks superb for about a year and then shows everything
  • a mid-tone grey or warm neutral is the most forgiving choice in wet zones
  • floor grout should be darker than wall grout in most schemes
  • always view the grout sample against the actual tile, wet and dry

Contrasting grout also exposes tiling accuracy. Any variation in joint width becomes visible, so it demands a very good tiler and a very flat substrate. See bathroom colour schemes and finishes for how this fits the wider palette.

Free planning tool

Planning your bathroom renovation?

Try our free Gold Coast bathroom estimator — a ballpark price in under two minutes, no email required to see the range.

Joint Width and Why It Is Not Arbitrary

Joint width is partly aesthetic and partly technical. Tiles need a joint to accommodate movement, dimensional variation and substrate deflection — a tighter joint is not automatically better.

  • rectified tiles with precise edges allow narrower joints
  • pressed or handmade tiles need wider joints to absorb size variation
  • large-format tiles generally require a wider joint, not a narrower one
  • very narrow joints are harder to grout cleanly and harder to clean later
  • the grout product must be rated for the joint width you choose
  • the tile manufacturer's minimum joint recommendation is a specification, not a suggestion

Movement joints are a separate requirement again. Silicone, not grout, belongs at internal corners, at the wall-to-floor junction and around fixtures, because those joints must be able to move.

Where Grout Should Not Be Used

Cracked grout in a shower corner is almost always grout used where silicone belonged. Grout is rigid; corners move.

  • all internal vertical corners in the shower
  • the junction between the wall and the floor
  • around the bath edge and the perimeter of a shower base
  • around tapware penetrations and the waste
  • at the junction between two different materials
  • use a neutral-cure, mould-resistant sanitary silicone colour-matched to the grout

Silicone is a maintenance item with a finite life — expect to replace it periodically rather than treating a failure as a defect. See bathroom maintenance: grout, silicone and glass care.

Sealing and Curing

Cement-based grout needs time and, usually, a sealer. Rushing either is one of the more common causes of an early-life complaint.

  • allow the manufacturer's specified curing period before heavy use of the shower
  • seal cement-based grout after it has fully cured, not immediately
  • penetrating sealers are generally preferable to surface coatings
  • reapply the sealer periodically — annually in a heavily used shower is reasonable
  • epoxy grout needs no sealing at any point
  • natural stone tiles may need sealing before grouting to prevent staining the stone

Curing is one of the small program items that makes a renovation timeline realistic rather than optimistic — see bathroom renovation delays.

A Practical Way to Decide

For most Gold Coast and Brisbane bathrooms, this combination gives the best result for the money.

  • epoxy grout in the shower walls and shower floor
  • a quality polymer-modified cement grout elsewhere, sealed after curing
  • a mid-tone colour close to the tile in wet zones, darker on the floor
  • colour-matched neutral-cure silicone at every corner and junction
  • joint width per the tile manufacturer's recommendation, not by preference
  • a written note in your handover pack of the exact grout product and colour used

That last point costs nothing and matters years later. Matching an unrecorded grout colour for a repair is close to guesswork.

Frequently asked questions

Both the material and the labour cost more, because epoxy is slower to work with and must be cleaned from the tile face precisely as it cures. Ask your contractor to price the shower in epoxy separately so you can see the actual difference for your job.

Not as a coating. Regrouting properly means raking out the existing grout to an adequate depth first. Products marketed as grout paints or refresh coatings are cosmetic and temporary rather than a true regrout.

Usually soap residue, body oils and mineral deposits absorbed into a porous cement-based grout, sometimes with mould growth in the surface. Sealing slows it; epoxy avoids it. In an existing bathroom, deep cleaning and resealing helps, and regrouting resolves it.

Not necessarily. A darker floor grout is common and practical, because floor joints collect more soil. What matters is that the two relate — a jarring difference at the wall-to-floor junction is noticeable.

Follow the product manufacturer's curing time, which your tiler will know. Using a shower before the grout and silicone have cured properly is a common cause of early discolouration and joint failure.

Cement-based grout can be recoloured with dedicated grout colourant products, which can be effective as a refresh. It is a surface treatment with a finite life rather than a permanent change, and it does not work on epoxy.

Keep reading

How to Plan a Bathroom Renovation on the Gold Coast

A practical Gold Coast guide to planning layout, drainage, ventilation, storage, tiles and inspection preparation before renovating a bathroom.

Bathroom Waterproofing Standards Australia: A Practical Homeowner Guide

A plain-English guide to Australian bathroom waterproofing standards, common wet-area risks, Gold Coast humidity, drainage, tiles, strata issues and inspection checks.

Narrow Bathroom Layout Ideas: A Gold Coast Homeowner Checklist

A practical checklist for planning a narrow bathroom layout on the Gold Coast, including fixture placement, drainage, ventilation, tiles and storage.

Ready to plan your bathroom renovation?

Use our free estimator to get a practical starting range, then request a fixed-price quote after inspection.